How to configure vlan dlink 1210-48?

There are 2 dlink dgs1210-48, mikrotik rb2011.
How to connect two switches , configure vlanы, and a tribute to the Internet . Please explain
June 26th 19 at 14:23
2 answers
June 26th 19 at 14:25
Solution
Do I understand correctly that the trunks are needed between the router and the switches ? For the material thank you, I will study! - marcellus80 commented on June 26th 19 at 14:28
right, trunk(tagged) port to transmit tagged traffic, access(untagged) to connect to the VLAN.
one/multiple ports, see for yourself, depending on the amount of traffic in planah. if you have two VLAN will 800мбит traffic to drive through the router - of course better on different physical ports post, otherwise we'll both have 500мбит and one fully loaded port - Franz.Waters16 commented on June 26th 19 at 14:31
: I thank for the help! - marcellus80 commented on June 26th 19 at 14:34
: Could you tell me another such moment how to act, created a vlan s in microtime (eth5), the switch(#1) made the 1 and 2 port tagget, 3(vlan 3) and 4(vlan 4) unttaget. on the switch (#2) only 1 port tagget, 3(vlan 3) and 4(vlan 4) unttaget . Vlan s earned all OK, but I have to switch #1 on other ports works network (not a vlan. another port with Mikrotik eth2) how to do that would be to distribute the network on switch #2? or just drive it also in vlan? I apologize in advance for so much text, I just don't know what to do.... - marcellus80 commented on June 26th 19 at 14:37
and the problem is what? and then you just config described.... - Franz.Waters16 commented on June 26th 19 at 14:40
: the problem is that if you connect to #2 switch to any port chrome those that I described, not running a network without vlan s... if another cable to connect it turns out the loop..... - marcellus80 commented on June 26th 19 at 14:43
either raise the third VLAN and all ports in it, or post the ports 1,2 and 3,4 on different Brigham and ports outside ulanow set to "not member" in the settings, Ulanov on the switches and throw another cable - Franz.Waters16 commented on June 26th 19 at 14:46
: tell me and will it work if 3 vlan is on a different port Mikrotik? Or still have another cable to connect ? - marcellus80 commented on June 26th 19 at 14:49
: will, raise a vlan on a trunk port, create a bridge and throw the VLAN and the port bridge - Franz.Waters16 commented on June 26th 19 at 14:52
: ie if you apply to my layout will turn out that eth2 and eth5 should be in the bridge? - marcellus80 commented on June 26th 19 at 14:55
: Thanks! tomorrow I will try, easier of course all through one port to make.... it is interesting and can and should do ? enough 1 Gbit port? - marcellus80 commented on June 26th 19 at 14:58
: I have no idea, you should know better - Franz.Waters16 commented on June 26th 19 at 15:01
: if the second port you have the trunk then the bridge needs to be an interface VLAN, not the port itself - Franz.Waters16 commented on June 26th 19 at 15:04
June 26th 19 at 14:27
And another question and it is better to configure via a single physical interface of the router or through different to reduce the load ?

Find more questions by tags Network administrationMikrotikComputer networks