Mikrotik. The port forwarding. How to make access from the local network to my own white IP?

Hi all. The bottom line is this: I have a white ip address. On the router proposed port on the local server. If from the LAN try to go to this white ip, then of course nothing comes out. Because the server responds to the white address, and the router already knows where to respond.
When you set up PCC came across an article with an elegant and simple solution based on marking this traffic. Now an article can not be found. Please tell me how to solve this problem?

PS Found the answer to your question: wiki.mikrotik.com/wiki/Hairpin_NAT
July 2nd 19 at 14:24
3 answers
July 2nd 19 at 14:26
Solution
Thanks, but managed to find before I saw your response =) - Dejuan.Hayes commented on July 2nd 19 at 14:29
July 2nd 19 at 14:28
and why, if the server is in local network, not connected via the local IP? I have the same problem, I solved it using the hosts file.)
Because too much of hemorrhoids on each computer in the enterprise to change the hosts file. You can of course add in the dns server zone with this domain, but this is not the best solution. - Dejuan.Hayes commented on July 2nd 19 at 14:31
: Ah, I see) I thought a small network. - Dejuan.Hayes commented on July 2nd 19 at 14:34
July 2nd 19 at 14:30
If the network is large and features - it is better to create a DMZ and put a white address directly on the server. NAT is always a crutch.
Not that we are not Mature enough. - Dejuan.Hayes commented on July 2nd 19 at 14:33

Find more questions by tags Network administrationMikrotik