How to restore the monitor (to reset BIOS)?

Monitor LG Flatron L1950SQ.

Suddenly turned off and after a few strokes in the drum, is connected only to the mains, and began to do the following:
— Enable button/power indicator
Splash monitor (Flatron) for a split second
— Turn off and again

What could be wrong and how to fix it?

*tear-stained "smiley face"*
July 2nd 19 at 17:33
3 answers
July 2nd 19 at 17:35
Judging by the symptoms, the power supply goes into protection, maybe burned down one of the lamps of the backlight.
Lamp or changing, or "emulates" (replaced by a suitable high voltage capacitor for example).
You might also replace the LED.
But if the question arose, "what about him", it is better in service.
There is also a chance that flew firmware, then replace the memory and fill firmware.
Still carry in service. - Maye.Boy commented on July 2nd 19 at 17:38
July 2nd 19 at 17:37
Take it to repair.
Somewhere in capacitors for example, could fail. Not once faced. Buy in this case, a new monitor, the easiest to repair, and after repair for sale at the flea market spread. Just "another" I don't need, and after renovation live for a long time, as practice shows.
This is the second monitor and I'm very used to working with two. It's a shame that broken, but not fatal. - Maye.Boy commented on July 2nd 19 at 17:40
Believe me, I have five monitors on one computer ;) - Maye.Boy commented on July 2nd 19 at 17:43
And the problem conder to change? If there is a suspicion - can parallel conder solder and check. - thea.Gusikows commented on July 2nd 19 at 17:46
: Unfortunately, Yes. No equipment for this. - lester_Emmerich commented on July 2nd 19 at 17:49
July 2nd 19 at 17:39
Power supply the monitor could have a real one and when now and does not hold the load.
Separate unit no. - Maye.Boy commented on July 2nd 19 at 17:42

Find more questions by tags Do it yourselfMonitors