How to configure network with Proxmox to gateway VM was on the same subnet?

Need statics in the guest proksa, the same as in proks, from the same subnet and access to the outside. When you install Debian in a VM Proxmox it the installer says that the network has no dhcp server or other problems (this is if you select bridge, with nat so there is no error). Prescribe manually and as a result the network is not available, except nothing can ping localhost. In the screenshot the approximate scheme 44LsXGu.png

With Proxmox previously was not the case. Can't figure out how to configure the bridge in /etc/network/interfaces to solve the problem.
The picture settings proksa mgwyvFt.png

Thanks in advance
July 2nd 19 at 17:34
3 answers
July 2nd 19 at 17:36
Why the heck do you Proxmox in VirtualBox or lxd
because the problem is - nikita.Stracke commented on July 2nd 19 at 17:39
: well shove all in one bridge - Eulalia22 commented on July 2nd 19 at 17:42
what is it like? - nikita.Stracke commented on July 2nd 19 at 17:45
: well, create the breeches and all interfaces it stick - Eulalia22 commented on July 2nd 19 at 17:48
even I got confused. and it is possible more precisely? - nikita.Stracke commented on July 2nd 19 at 17:51
create everywhere puts them in br0 eth0 - Eulalia22 commented on July 2nd 19 at 17:54
July 2nd 19 at 17:38
Here in this article there is a description of the settings in both bridge and NAT
Installing Proxmox
there is, but I do not fit - nikita.Stracke commented on July 2nd 19 at 17:41
July 2nd 19 at 17:40
I did as advised by Cougar, but the network is not running in the guest

Find more questions by tags ProxmoxDebianNetwork administrationVirtualization