When replacing the RAM the server is not included?

Features: CPU E3-1240-8M-Cache-3_30-GHz , Motherboard Intel S1200BTL Beartooth Pass LC RAM - Kingston 9965472-006.A00LF \ Unbuffered DIMM \ DDR3 SDRAM .

Installed 2 laths in 1 and 3 slot, replaced them with others - not working. Put the new one in the neighboring slot is not working. When replacing the above RAM, on the above Mat. the Board, on Crucial 4GB 240-Pin DDR3 SDRAM ECC Unbuffered DDR3... the motherboard when you turn on signals and not even loading the BIOS ( black screen ). Please tell me what could be the reason?

List:
tested memory, etc.
tested processors
July 2nd 19 at 18:13
4 answers
July 2nd 19 at 18:15
Solution
See Doc what memory is supported and in which slots must be put.
Plus listen as it squeaks and the same manual to find out what kind of error.

UPD download.koncar-inem.hr/public/serveri/AVA-4320E3/... page 19 describes the codes and their descriptions. There, on page 154134 has a decoder for light bulbs.
If the accountant today to leave early, is delayed to test the audio signal.
Possible codes POST Error Codes and Messages with the help of a program to retain because information is not displayed on the monitor? - iliana.Beahan commented on July 2nd 19 at 18:18
: need a card postcode - floy21 commented on July 2nd 19 at 18:21
: card I mean the card Board or the table in the documentation? - iliana.Beahan commented on July 2nd 19 at 18:24
: pci card inserted in the motherboard + table (book) with detailed explanations of the codes - floy21 commented on July 2nd 19 at 18:27
Thank you! The output will look on a radio market. Will try. - iliana.Beahan commented on July 2nd 19 at 18:30
Judging by the manual on the motherboard at the back should be LEDs that show Post code. - Lucas commented on July 2nd 19 at 18:33
: I looked closer docks. Tell me more precisely in which slots you put the memory modules?
You need to use A1 and B1. It should be 1 and 3 if you count starting from the farthest slot from the CPU. funkyimg.com/i/2jtd3.png
If this advice does not help, then read the review further:
+ links with www.intel.ru/content/www/ru/ru/support/boards-and-...
it is evident that the list of compatible modules only have (CT51272BA160B.18FMD 4GB (1X4GB) UDIMM, DDR3, 2 Rank 1600MHz)
So what about compatibility to speak early. Although looks a bit strange and is at odds with the rest of the documentation, in the list there are no memory 1066. - Lucas commented on July 2nd 19 at 18:36
Tried the following combinations (n - N-New (4pc); With Old (2pcs.):
1__2__3__4 - the memory slots ( A1__A2__B1__B2 )
with______with___ - work ( original configuration )
with__n___s__n - not working
n______n___ - not working
___n______n - not working
n__n___n__n - not working - iliana.Beahan commented on July 2nd 19 at 18:39
--Judging by the manual on the motherboard at the back should be LEDs that show Post code.
Yes, on the motherboard there are LEDs that are found in the manual layout and codes. But unfortunately today will not work to check. Tomorrow or at the weekend. - iliana.Beahan commented on July 2nd 19 at 18:42
: A single-channel mode with one strap? If it doesn't work, then the problem is with compatibility. - Lucas commented on July 2nd 19 at 18:45
One strap did not try, it would be horrible if everything is as you say. - iliana.Beahan commented on July 2nd 19 at 18:48
Try and look at the indicators on the rear (should be). They should more precisely error. - Lucas commented on July 2nd 19 at 18:51
Finally got to the server. Next came some miracles...
Stuck a map of POST codes;
Put 1 bar in the 2nd slot start, passed the tests, downloaded the OS;
Put 2 straps in the 2nd and 4th slots start, passed the tests, downloaded the OS;
Put 4 planks in all the slots - start, passed the tests, downloaded the OS.
Decided to leave it in that condition and see how many days it will fall. - iliana.Beahan commented on July 2nd 19 at 18:54
Well, try to put memtest on overnight/weekends if the situation allows. - Lucas commented on July 2nd 19 at 18:57
July 2nd 19 at 18:17
Try resetting the BIOS to default settings. Usually this peretekanie jumper on the motherboard.
Then put a new memory.
Specification on the Intel website a new memory fit.
July 2nd 19 at 18:19
To the word.
A similar case was at me last week. Got a computer with mother GA-EP43T-USB3. The client wanted to increase the memory. According to the specifications of the mother supports the memory frequency of 1333. So I took 2 laths (Kingston DDR3 RAM 4GB 1333MHz PC3-10600). After installation the computer would not start, under any combinations of the permutation bars. Update BIOS to the latest beta did not help. Put more "fashionable" percent-identity is not helped. Map postcodes signaled that plugging in "memory"

The result had to buy b/ear bar
How to explain it - I don't know, the only thing I can tell u b/ear chips from two sides, the new one.
The new chips from both sides. - iliana.Beahan commented on July 2nd 19 at 18:22
July 2nd 19 at 18:21
2nd week normal flight.

Gentlemen, before you purchase components for servers, read the documentation! And look at the lists of tested hardware on the manufacturer's website.

Find more questions by tags Iron