Why can't clear the flag read-only state on the drive?

Brought a flash drive with write protection, using Diskpart removed the read-only, but read-only state remains true. In the registry StorageDevicePolicies created the file WriteProtect and change its value – all in vain. How to remove the read-only state from the stick?
June 3rd 19 at 19:24
1 answer
June 3rd 19 at 19:26
As a variant, the controller could put the drive in mode "read-Only" due to wear of the NAND flash-memory chips.
Such behavior is especially fond of the device from Transcend.

To do additional diagnostics, you can use R. tester-but this should give at least a better idea of what happened.
R. tester found no defects in the hard stick - cathryn88 commented on June 3rd 19 at 19:29
And test read-CERT Tool, for example, Read Logical, mode=SEQUENTIAL, step=0 passes normally, with a steady schedule? - Devin75 commented on June 3rd 19 at 19:32
5b51c36f860a7838797357.png5b51c39a71696761156764.png - cathryn88 commented on June 3rd 19 at 19:35
In General it looks good.

Next, it's necessary to dig with your hands, you can start with the determination of iron, and then find a utility from the manufacturer (if available).

Thing to remember is that the software manufacturer takes down information from the flash drive permanently. - Devin75 commented on June 3rd 19 at 19:38

Find more questions by tags USB flash drives