How to access SMART if hard drives are connected to LSI SAS controller RAID + vSphere is your organization an array of hard drives?

Kind time of days respected community.
Is looking for information about how to access SMART data 6 drives are connected to LSI SAS radmaeva, which in turn means vsphere has its own logical partition.
The reason for the excitement is the periodic record of exceeding the recording delay from 1000 MS to 30000мс.
What proryvalas.
1) smartd via the powercli console provides data on the virtual disks of the creation of steroi and not real.
2) installed the utility on the remote machine and on the server, Megaraid Storage Manager
she can't find the network machine with a RAID controller, although all of the services on interms of running and active.
I'll be glad aid community.
July 8th 19 at 12:19
2 answers
July 8th 19 at 12:21
LSI will decide a spirited drive or dead
A record of exceeding the delay I had - at IOPS'am disks do not have time
July 8th 19 at 12:23
Well
There was another situation that scares me.
Freelance after light-off (oops, too, could not resist), the server does not vernulsya in working condition talked about errors in VMware (error forgot to write it down because you need to run the server in work) the Question remains open: how to check smart in the above-described configuration (the configuration is not mine to change it I'm not allowed.) The higher management ... washed his hands.

Find more questions by tags RAIDLSIS.M.A.R.T.SASVMware vSphere