The Union of two subnets with the distribution of wi-fi and access to shared resources?

Routers netgear 614 and 1000.
The scheme is
Internet - 614 (192.168.1.1 255.255.255.192) - 1000 (192.168.2.1 255.255.255.0) - it stuck system unit szara (192.168.2.2)
The Internet is working, but the network drive when you connect via wifi to the first router can not see the system unit with Shara on a different subnet.
On both routers DHCP is enabled.
We tried to limit the DHCP on the ground and off on the second (to make it a hub). But I can't pick a range of addresses. My options swears (invalid ip adress/ip address is conflicted with wan ip subnet).
Who can tell me the hidden combination?
July 8th 19 at 16:01

Related questions

More answers about "The Union of two subnets with the distribution of wi-fi and access to shared resources?"
2 answers
July 8th 19 at 16:03
you need a static route to the router 614 to 1000.
example
Mask 192.168.2.0 /24 gw 192.168.2.1
Not the fact that there route can be solved, there is a suspicion that the second router is connected to the first WAN port and the whole network together with filipovici sits for NAT th. - earl.Weissnat commented on July 8th 19 at 16:06
possible wireless clients isolation that Lana is working fine. - emerson.Bechtel commented on July 8th 19 at 16:09
The exact lace from the provider enters the apartment at 614. 614 from the lace stuck wan - om 1000. The Internet is heard a Bang, but with a serial connection there are two networks 192.168.1.x and 192.168.2.x.
The idea was to just leave DHCP on the 614 with the restriction, and 1000 to make a simple netgear hub and give it a static address from those which are not in the DHCP range on the 614. 1000 but refuses to turn off DHCP and make a static IP with abuse (invalid ip adress/ip address is conflicted with wan ip subnet).
So I can't understand it as it should be or netgear reinsured and how to solve it? - nikita.Stracke commented on July 8th 19 at 16:12
:
here (ip setup) change the IP that you have on the WAN interface, the WAN interface of c to pull the drawstring and stick in the switch port, remove the checkbox USE DHCP. - emerson.Bechtel commented on July 8th 19 at 16:15
: try to set 1000 mode wifi repeater it will be enough addresses 614 and then the network will one, appear globe. For the scheme that you have now, how I told you the entire network with the balls to NAT and forwarding route will not help. - Americo_Kuvalis commented on July 8th 19 at 16:18
July 8th 19 at 16:05
Thank you. Worked. Going to enjoy life. :)

Find more questions by tags Network administration