Mikrotik ISP with a /29 and a missing DHCP?

Good day, community!

A RB2011, the ISP without DHCP on the first port, a server with ESXi on the second port. Objective: to provide a new path white IPS via DHCP, preferably with wire speed. Now have kolkhozy in the form of a bridge with these two ports and DHCP server on this bridge. The dash is not very much, since DHCP serv prevents him.

f47f80a0ee414519b7c4ee90f892e109.PNG

How do advise?
July 9th 19 at 13:33
2 answers
July 9th 19 at 13:35
Solution
I can advise you this presentation of my: MikroTik lifehacking. This MUM 2016 Slovenia. The information You need begins with 50go of the slide. The video is there.
July 9th 19 at 13:37
Solution
and what hinders to wirespeed to do not via the bridge and via master/slave + to filter incoming requests from vneski?
then in one place and two places router to change not much of a difference. BUT mum is well written (in response to @moneron89) - Robyn commented on July 9th 19 at 13:55
how do you plan to associate a dhcp ip address and changing the config? ie it is necessary to virtualcom to specify what they need to have an ip address or a Mac or something else... otherwise how Mikrotik will know that this dev to release the Internet via the address? - Robyn commented on July 9th 19 at 13:49
And it is possible more in detail about filtering? Well, not wyre AIDS, but to 200MB / s freely pulled - colin.Jaskolski commented on July 9th 19 at 13:40
if "head" then on the Mac:
add action=jump chain=input dst-port=67,68 in-interface=eth1_xxx (master interface) jump-target=FilterDHCP protocol=udp
add chain=FilterDHCP src-mac-address=00:00:00:00:00:01
add chain=FilterDHCP src-mac-address=00:00:00:00:00:02
add action=drop chain=FilterDHCP
filtered udp 67,68. All addresses that do not fit our list of poppies block - Robyn commented on July 9th 19 at 13:43
: well not really want to mess with poppies - configurare of virtualab may change often.... Is it possible to filter on the port to do? It turns out, the bridge should be removed, and how then to be? The route to register? - colin.Jaskolski commented on July 9th 19 at 13:46
: using static lease - colin.Jaskolski commented on July 9th 19 at 13:52
: Checked? I did not try never )) - neva_Metz commented on July 9th 19 at 13:58
not yet, but something drew. muma this year, haven't watched it, but there are often creative solutions.

if you need to quickly do what I wrote. if I went to the router to static to give you rules to add address - Robyn commented on July 9th 19 at 14:01
: : set up for Mumu, normal flight. Now Mikrotik works as a router), respectively, present in the trace from and to the Internet. - colin.Jaskolski commented on July 9th 19 at 14:04
: Great )) Good news ) Happy to help - neva_Metz commented on July 9th 19 at 14:07

Find more questions by tags MikrotikNetwork administrationComputer networks