[mikrotik] How to allow traffic via VPN/IPsec to see my network?

Good day! The bottom line:

There are 2 offices:

1. Mikrotik network
2. Some clever d-link

Raised between us VPN/IPsec:

Interfaces ipip-tunnel
Further rules Peer's

Everything is great, he sees my gateway, and for some reason, only the ip addresses of the statics is registered and only on windows, i.e. asterisk is shown - it does not see. Also he does not see users with a dynamic ip.

I, in turn, great pingou his entire network, but here's an example, go to the web interface of the sip phone can no longer.

Please help connoisseurs routing and firewall rules help.

1 problem solved, see from his network dynamic Usera on the wind by manipulation of the route to its network interface ipip-tunnel and bridge.
PS do Not throw stones! Yes, settings on Mikrotik lavaltrie. :(
July 12th 19 at 17:17
2 answers
July 12th 19 at 17:19
I made a VPN pool from that range for DHCP. In microtime need to add a route to the network Dlink and gateway will have IP issued to the VPN connection. Should also be a rule to allow FORWARD from local network Mikrotik.
July 12th 19 at 17:21
ARP-proxy is on the interface which looks in a network? And the pattern slightly to draw even squares and clouds?

Find more questions by tags Network administrationMikrotikFirewallVPN