Illumination matrix imac 27 2012 — marriage or the norm?

imac 27 2012

on a black background matrix is not uniformly illuminated spots on the corners.

in all other colors everything is fine, the question is this:

it's a marriage or a matrix, it is possible to live happily ever after?

does not degrade the matrix/backlight over time even more?

081b351556504dd589f0dfe523cc796f.jpg
September 19th 19 at 13:31
3 answers
September 19th 19 at 13:33
Solution
This effect is called glow and is always present on all monitors with a matrix, made by technology IPS. The degree of error his power is pretty significant, if glow is especially pronounced spot at one point, but not evenly from the corners, in principle, these monitors are ready to change under warranty, but this is not your case, you are all well, don't worry, you will live with him happily ever after :)
Thank you so much for your answer! - Shaina_Reynolds commented on September 19th 19 at 13:36
: don't forget to mark the correct answer as solution :) - Maximilian_Mo commented on September 19th 19 at 13:39
: noted! thanks again! - Shaina_Reynolds commented on September 19th 19 at 13:42
September 19th 19 at 13:35
On my iMac 2013 is a little to the right, it is a feature of the backlight probably on large matrices are difficult to light evenly, to do this across the plane of the lamp set, I had such monitor, he ate about 60 watts at 23 inches.
September 19th 19 at 13:37
All Monique that I saw in the dark was the same or similar effect, and that the white band on top then?
Stripe top menubar on a blank screen ;) - Shaina_Reynolds commented on September 19th 19 at 13:40

Find more questions by tags iMac