The selection and configuration of the switch, which one to choose?

There is a home mesh, which goes through the Zyxel Giga 2, all 5 ports which were occupied, but there was a need for additional ports, so I'm thinking about buying a switch. The choice fell on an inexpensive D-Link DGS-1005D. But since were not previously associated with such acts, the question arose. Zyxel automatically gives IP to the computers connected to it, which I will relay ports in global adjusted accordingly to this router,but how will the computers connected to the switch? will I be able to broadcast their ports since 1 port router I procenu the cable from the Zyxel and other free 4 will have additional computers.
September 26th 19 at 06:24
1 answer
September 26th 19 at 06:26
Solution
all work will be you're ports on the PI has opened so feel free to buy and
Well, I understand Zyxel is handing out your ip 192.168.1.XXX and the router is in fact already other ip to the computers spread, that's it? or am I wrong, and the router through the router to the computers connected to the router will distribute a secondary address. - Brent22 commented on September 26th 19 at 06:29
you need a switch , or just use the DGS-1005D as a switch , - Kane_Brekke commented on September 26th 19 at 06:32
>> the router via the router

Sounds epic! ;) The router is the router (the words are synonyms).
The computers connected to the switch address still will issue the router. All will be well. - darian.Simon commented on September 26th 19 at 06:35

Find more questions by tags Network administrationNetwork equipment