The problem with the MSI R6950 Twin Frozr II. Ruined the BIOS. Need help for writing the script under Win7?

Here's the thing, Google in the Internet, I saw that you can alter 6950 to 6970, if suddenly fails, it is possible peredelnoj BIOS. But did not inspect closely, saw that:


and. My version is almost 100% fail to alter

b. No switch


As a result, the computer to boot, but the signal from the video card to the monitor is not.


I want to blind flash a BIOS in advance subacutely. Hence the question, is it possible to make the batch file on the flash drive that automatically runs when you connect the flash drive to the computer 2 and performs the operation, and at the end does reboot? If not, then maybe there are other ways to alter the original BIOS?


PS Commands which need to be fulfilled:

cd C:\ati_winflash_2.0.1.14

ATIwinflash -f-p 0 C:\ati_winflash_2.0.1.14\bios6950.rom
October 8th 19 at 00:31
5 answers
October 8th 19 at 00:33
Solution
A variant — to stick to computer 2 vidyahi, loaded with working and to sew a BIOS in hours? I think that proximately can tell where to sew the BIOS then...
Well or as a variant — with working some in the BIOS to set the correct load, and then FreeDOS + sweater - ja commented on October 8th 19 at 00:36
My mother's only one place under vidyahu... - pamela.Stroman85 commented on October 8th 19 at 00:39
PCI vidyahi? built-in video? - ja commented on October 8th 19 at 00:42
I have ASUS P8H61 - pamela.Stroman85 commented on October 8th 19 at 00:45
about PCI it is not thought, damn! will do so! - pamela.Stroman85 commented on October 8th 19 at 00:48
October 8th 19 at 00:35
And why not just wait until it loads Windows, insert the flash drive, press Win + R, enter cmd, and then your team? Important to print neatly.
Good idea, I must try! Why not think of it! - ja commented on October 8th 19 at 00:38
And it really is a good idea. Only caveat — it is better not using Win + R and start — cmd — ctrl+shift+enter — 3 sec pause — left arrow — enter =) And next on the list - pamela.Stroman85 commented on October 8th 19 at 00:41
October 8th 19 at 00:37
Try to make bootdisk with FreeDOS and an autoexec.bat to register a call to this program.
Thanks for the advice, but I'm not sure that in the BIOS I put boot in pendrive... - ja commented on October 8th 19 at 00:40
You don't have to do a flash drive, CD/DVD, disable eventually the screws. Why then the computer will try to boot up. - pamela.Stroman85 commented on October 8th 19 at 00:43
In the end, take friends Vilaseca, to set the desired settings in the BIOS and go :) - ja commented on October 8th 19 at 00:46
Maybe the motherboard has a built-in vga, for example? Although I think you would have noticed :) - pamela.Stroman85 commented on October 8th 19 at 00:49
No, vga no built-in unfortunately, CD/DVD drive either) to turn off screws option! Thank you!

On the bill to take vidyahu, a good option, as the thought to act. - pamela.Stroman85 commented on October 8th 19 at 00:52
October 8th 19 at 00:39
Starting from Lyosha can be done with Potosi Autorun.inf, and in it a link to the batch file.
so like Windows now Win7 does not work... - ja commented on October 8th 19 at 00:42
October 8th 19 at 00:41
Well, what ended adventure, then?)
Still nothing, decided to find a PCI graphics card to personally to do everything from sin... However, that's just so unclear where to get it) - ja commented on October 8th 19 at 00:44
Well, now ended, I bought a PCI vidyahu, booted under DOS and flashed the normal BIOS with atiflash funds. - pamela.Stroman85 commented on October 8th 19 at 00:47

Find more questions by tags AMDBiOSIronWindows