The problem with the router TP-LINK WR941ND to DD-WRT

Good time of day.
Looks like I just bricol your router, installing the firmware it generation — I got a v3.5, but I rounded up to 4 and put the firmware for v4.
Now my router does not respond to pings, can't connect to it via TFTP, as advised in the wiki of dd-wrt.
How else can you try to bring back to life my piece of metal?
Thanks in advance for your answers.
October 8th 19 at 01:12
2 answers
October 8th 19 at 01:14
Try pressing the reset button, hold for 30 seconds, turn the power off, wait 10 seconds, and while continuing to hold reset, wait 30 more seconds. You can then try to push the firmware via TFTP (just to be sure, you can first fill the application type marked as "clear nvram")

LinkSys's and Asus's thus come to life. From ~20 routers to death bricot nor managed neither.
In the case of brick enlivened by the above method.
did not help :( - heber_Herman commented on October 8th 19 at 01:17
October 8th 19 at 01:16
By the way check out alive if the boot loader on the router, podclass to it with the console cable. Know about the case when the person restored the router give it the correct firmware via the console loader, preobrazovan it in the HEX-codes and the Gulf via Hyperterminal

Find more questions by tags Operating systemsNetwork administrationLinux