BSOD in the last SandForce SSD?

Choose between the Corsair Force GT 120GB and OCZ Vertex 3 120GB.


On the forums quite a lot of swearing on the theme BSOD's both drives, but the problem is that most of them dated in the fall of 2011, and in January and February comrades are not taken into account since the firmware version is banal can not say.


Given the age of this problem — there are suspicions that it already had to decide.


So — please tell me that has experience with either of these two cards, the relevance of the problem of lockups and bsod's for you?


OCZ's kind of like actively rivet firmware, but the swearing on the Force GT is significantly less than the Vertex.


PS.: The second question is a little more distant. Whether really normally to raise the system to update the firmware SSD'NIS and everything else without having the other drives, this SSD will be in RAID0?

The maximum that can do is to insert one SSD into the laptop as a second screw.
October 8th 19 at 02:47
5 answers
October 8th 19 at 02:49
Three computers are OCZ Agility3 60GB
All were BSOD, recovered all the same — the installation of the wood on the controllers.
After installing Intel of firewood, I go to the device Manager and there on the controller are wood Windows, dated 2006, prescribed in the manual of the driver and everything is OK. One laptop on the AMD platform, too, after manual tracing of drivers for several months, everything is OK.
For me it remains a mystery why after installing those wood, they do not replace the standard Windows...
October 8th 19 at 02:51
Why do you need RAID0?
October 8th 19 at 02:53
I use Vertex 3 120Gb 6 months. Latest firmware: 2.15 chipsets — Z68.
For all the time use any BSOD'and.
October 8th 19 at 02:55
The owner of a OCZ Vertex 3 120GB, I use since the beginning of January, during this time, accumulated 500+ hours, no problems were found. Was firmware 2.15, flash was not necessary.
October 8th 19 at 02:57
Vertex max iops 120gb fw 2.15. After months of work, when you run demanding applications (e.g., TF2), there were friezes, up to a full system hang for 20-30 seconds. How much time was even Body with error 0x000000F4.

Find more questions by tags Solid state drivesWindows