How to get Internet from a different subnet?

Hi all. I can not understand what to do. The scheme is as follows, I tried:
Network primitive, home routers zyxel. In the core of - on the Internet,with dhcp on wifi connected the second router ( To them(to the routers) connected ip camera. Also on wifi connected other Internet consuming USTR-VA. Now decided to put a camera on the street(on the mast) and to forward the wifi bridge to the Internet for our very bad. received the following:
on the mast hung the switch(there's a mistake in the diagram,to the switch 700 meters of optics, not copper) and pushed the bridge. Question: how to take the Internet router (joined wifi bridge) and to distribute to our subnet the route to create or what? PS core) zyxel keenetic iii, quite stupid. You should also be able to access the new camera .116 and what would our network to work autonomously, if you fall off the bridge
March 19th 20 at 09:01
4 answers
March 19th 20 at 09:03
Why do you extreme router in subnet 0 and not 1? What is the hidden meaning, if Ubiquti both in 1 subnet?
Assign it the address 1 subnet, and make the default gateway for other devices.
Does not fly, because Ubiquti not rotate, beyond different network :D - yadira_Kle commented on March 19th 20 at 09:06
@yadira_Kle, I just offer the option where you do not need to routit - network everywhere is one. - Randal commented on March 19th 20 at 09:09
@Randal, zero foreign network. Well, let's say, we change the subnet by 1, and if the bridge will fall off? We have cameras with the Registrar on the 1st network and a zero(someone else's) the Internet flies... - Nadia.Williams commented on March 19th 20 at 09:12
I am a layman in networks, just playing for the camera) - Nadia.Williams commented on March 19th 20 at 09:15
zero network is a stranger.

Then bet between 0 and the nearest ubiquti router your router WAN port connect to someone else's router and LAN port to ubiquti.
On the WAN port, assign an address from 0 network LAN of his. And this last address to the LAN port of the router make the default gateway on all devices in your network.
Address for the WAN port ask the neighbors. If they have DHCP, so the address should be machine naznachaetsya.
Nuclear router WAN port is not used. - Randal commented on March 19th 20 at 09:18
@Randal, and if I need dhcp I have in the 1st subnet? For example, what would wifi to the phone to pick up without the prescription of the gateway.
5c9cde59af3b4480320188.jpeg - Nadia.Williams commented on March 19th 20 at 09:21
@Nadia.Williams, Your DHCP is handing out addresses in your network, and the neighbor will hand out 1 address for your router extreme, as well as do Internet providers. A gateway can register automatically via the options in the DHCP server. He, in fact, and is distributed by default. Only the default gateway assigned to the LAN address the DHCP of the router, and now you need to specify this address manually.

If you want to share an Internet connection with a nuclear router, then you need to change the addressing of the devices (at addresses from 0 network) the whole branch from nuclear router to neighbour's router. And this line to plug in WAN port of router nuclear. - Randal commented on March 19th 20 at 09:24
March 19th 20 at 09:05
TD 1.4 translate in a router mode, disable DHCP on it, on the 1.1 router in the DHCP settings to point slusam 1.4 (if the firmware is able), about channel switching in the case of the blade of the bridge - with your iron or in which case back to change DHCP settings on 1.1 and perepoloshit settings on the clients.

PS 1.5 to 0.0/24
March 19th 20 at 09:07
It is believed that you need to understand the basics of routing in networks. OSPF dynamic routing. Equipment for replacement. And nothing is impossible, the thing crutches to be applied.
Then what for OSPF? No dynamic routing here and does not smell. - Randal commented on March 19th 20 at 09:10
Under the replacement? and what is the functionality needed? can flash ? - Nadia.Williams commented on March 19th 20 at 09:13
March 19th 20 at 09:09
Thank you, put the router after 0 router and assigned gateway

Find more questions by tags Computer networks