With the disc bad?

after 100% just close?
as I understand the disk is bad?
not even 101 error
and 300
5ccd74ff6ffaa848384786.jpeg
March 20th 20 at 11:45
3 answers
March 20th 20 at 11:47
Or disk is bad, or (very unlikely but you can try) might be broken cable.
Check with another cable if same - to throw.
March 20th 20 at 11:49
What are we talking about? Disk 300 bad sectors the drive is dying. Pull the information to another disk.
@ronaldo, I don't have to Google, I wrote what it means, even before you wrote - tristian.Baumbach commented on March 20th 20 at 12:10
@ronaldo, I mean no program will help? 1200 already - Arvid commented on March 20th 20 at 11:52
@Jodie, no, the disk emission is 100%. - Corene53 commented on March 20th 20 at 11:55
now look SMART and get your words back - tristian.Baumbach commented on March 20th 20 at 11:58
@Trent, and now look at Current Pending Sectors and not clever. Babloki SMART to fall into the list badblocks immediately. - Corene53 commented on March 20th 20 at 12:01
@ronaldo, you yourself know the value of this parameter? Not peeping in my comment!
Why not try to be clever, blunt, like you - to make the diagnosis before the diagnosis? - tristian.Baumbach commented on March 20th 20 at 12:04
@Trent, this is burned, to make.
Google at least about pending sectors. - Corene53 commented on March 20th 20 at 12:07
March 20th 20 at 11:51
Don't close your tab SMART need.

It's not much.
@Trent, and how much?

will be 100 percent and then what ?

She'll fix that after clicking on one folder says file or directory is corrupted and unreadable. Reading impossible
? - Arvid commented on March 20th 20 at 11:54
@Jodie, that's when you get to the end, then we'll talk. Screenshots don't forget to do this and tabs, and SMART.

Before said decision, nothing is decided yet :(. - tristian.Baumbach commented on March 20th 20 at 11:57
@Trent, It is correct that after clicking on one folder says file or directory is corrupted and unreadable. Reading impossible
? - Arvid commented on March 20th 20 at 12:00
@Trent, how long can run? - Arvid commented on March 20th 20 at 12:03
@Jodie, if the place is damaged - this is not correct. There there is a subtlety, but it depends on the result of the program (and the algorithm of the firmware of the drive). If there was important data, most likely, they already lost. But if what is important is the drive, it will most likely need to be replaced. But again - depends on the outcome of the work - wait!

Can work a few hours, you have a counter (in the screenshot - End time) shows 2.5 hours. - tristian.Baumbach commented on March 20th 20 at 12:06
@Trent ,ie no program will help? Already 1200 error - Arvid commented on March 20th 20 at 12:09
@Jodie, if the disk will mark them as failed, and this damaged area will not grow, the disk can be used further. If you simplify the program uses standard commands to the drive, and for the internal kitchen, what's being done at a lower level, he answers himself. - tristian.Baumbach commented on March 20th 20 at 12:12
@Trent, 2-40 already passed
yet
5ccd93f6c0cff800408133.jpeg - Arvid commented on March 20th 20 at 12:15
@Jodie, so I seem confused, it's not the remaining time :(.
Passed the third, then the speed will fall, so time to wait twice as long, or even longer, say three times, that is 5 hours. - tristian.Baumbach commented on March 20th 20 at 12:18
@Trent, why longer? now like % faster
and less error
almost not even added
for so long , probably because errors were - Arvid commented on March 20th 20 at 12:21
@Jodie, to the end of the drive drops the speed of read/write.
5ccda5bbe8b35647186328.png

Well, Yes, because of the errors was longer, but still the full scan not the quick process. - tristian.Baumbach commented on March 20th 20 at 12:24
@Trent, so maybe it was necessary to choose not full?
or not? - Arvid commented on March 20th 20 at 12:27
@Jodie, if you want to check that you have no choice.
On the other hand, if the errors stop appearing for quite a long stretch, you can cancel the check and see what's in smart. - tristian.Baumbach commented on March 20th 20 at 12:30
@Trent, no cancellation did not see it? - Arvid commented on March 20th 20 at 12:33
@Trent, in principle I am ready to cancel
You here? - Arvid commented on March 20th 20 at 12:36
@Trent,
here
results

5ccdafc26462a047579076.jpeg5ccdaffc26c37358107933.jpeg - Arvid commented on March 20th 20 at 12:39
@Jodie, press the button Get SMART - tristian.Baumbach commented on March 20th 20 at 12:42
@Trenthere
5ccddd14e3d6f146508049.jpeg - Arvid commented on March 20th 20 at 12:45
@Jodie, an important parameter - 5, the one that we need right now, and there is a zero, then these bad sectors no or not yet
but there is a parameter 191 is "shock detection". Stop hitting the laptop! And you'll file a complaint, the collective! And luck too!
194 - drive overheating not that deadly, but highly undesirable
196 - event count reassign - too on zero.
197 - "frozen sectors" - and here 233 pieces, they will either be reassigned or will be fixed (maybe partially and/or more)
199 - interface errors - 998 pieces, you should try to replace the cable (if any) or vytknout disk, clean the cable connectors, disk and the connector on the motherboard of the laptop, stick it back in.

Now it is necessary to bring the diagnosis to the end, but it is desirable to lift the laptop or put on the cooling pad, if it is, let it drive a little better cooled during the test. - tristian.Baumbach commented on March 20th 20 at 12:48
@Trent, as it gets to 100 percent then there will be some kind of fix? What should I do? A restart of the PC? Or click something else?

Screenshot then send?

And could this be anything to replace the do not need? - Arvid commented on March 20th 20 at 12:51
@Jodie, maybe. They (the discs) do not always immediately do.

After finishing, make screenshots, turn off the laptop (and you do the laptop, if the screw 2.5"?), wait a minute, turn back, re-launch Victoria, choose your disk, go to the SMART tab, and again please take a screenshot of - view.

With such errors, the disk is still better to change, if it stores a little bit of valuable information. And always do backups! But if there is only Windows and software, then you can safely use to complete dying. This disc could live long and die suddenly. - tristian.Baumbach commented on March 20th 20 at 12:54
@Trent, what if during scanning I have it left off
the laptop is overloaded
and says Windows failed to boot? what to do? - Arvid commented on March 20th 20 at 12:57
@Jodie, that means some Windows files are in those damaged sectors. In General, it is desirable to boot from a "live stick" to the wind not pulled the drive during the scan and is certainly not loaded with it. For simplicity, we can take this one ... https://habr.com/ru/post/415593/ - tristian.Baumbach commented on March 20th 20 at 13:00
@Trent, ie the process is very similar to installing Windows from a flash drive? - Arvid commented on March 20th 20 at 13:03
@Jodie, a little bit, but the installation is not Windows (or any instrument choose in the menu) to boot directly from the stick. - tristian.Baumbach commented on March 20th 20 at 13:06
@Trent, I use ultraliso
victoria.iso did not want me to record
and victoria.zip ( from another site) enrolled
is this normal? - Arvid commented on March 20th 20 at 13:09
@Jodie, there is also a program to record flash https://www.hirensbootcd.org/usb-booting/ - ISO2USB.exe
Or are you talking about capture the image of Victoria from the site of the Victoria? - tristian.Baumbach commented on March 20th 20 at 13:12
@Trent, see
it seems to have loaded
but ..
5cd14db058af8124868660.jpeg - Arvid commented on March 20th 20 at 13:15
@Jodie, and after the last line - Start booting from USB device is actually booting from the stick is not passed? - tristian.Baumbach commented on March 20th 20 at 13:18
@Trent, and everything hangs - Arvid commented on March 20th 20 at 13:21
@Jodie, it means "not recorded". With Find there are a lot of nuances, so it is better to write something simpler. For Example Rufus. - tristian.Baumbach commented on March 20th 20 at 13:24
@Trent, and the method download what to choose?

and where can normanby Victoria to record?
I just downloaded victoria.zip - there is in addition another victroria manual and adguard - Arvid commented on March 20th 20 at 13:27
@Jodie, I gave a link for "medical Assembly", or with the native of Victoria. And the music - Rufus.

and method download what to choose?

Where? - tristian.Baumbach commented on March 20th 20 at 13:30
@Trent, in Rusafa - Arvid commented on March 20th 20 at 13:33
@Jodie, Rufus. Leave all defaults. Pick a Daw - to Create extended label and icon of the device. Choose in the list next to the item - Create boot disk - (right) ISO-image, press the button of the disc (more to the right) - Click to select the image and specify the path to your .iso. Push Start and wait (it's fast) - tristian.Baumbach commented on March 20th 20 at 13:36
@Trent, no drsc+drdy or the screw does not remove busy work is impossible - Arvid commented on March 20th 20 at 13:39
@Trent, all плохо7 - Arvid commented on March 20th 20 at 13:42
@Jodie, it's just you after download not chose the controller and the drive :) - Carefully read the clues. - tristian.Baumbach commented on March 20th 20 at 13:45
@Trent, but where to choose? don't quite understand - Arvid commented on March 20th 20 at 13:48
@Jodie, after loading Victoria, the screen will display with the characteristics of companies (like) and below the label - to select the channel press P, the exact text I do not remember, but they seem to important to read carefully.
5cd42803b6bce372306586.jpeg - tristian.Baumbach commented on March 20th 20 at 13:51
@Trent, I pereustanovit Windows
and he started
or is it not solves the problem? - Arvid commented on March 20th 20 at 13:54
@Jodie, well, if the "boot record" (or files there any need) were in bad sectors, then reinstall after they have signed up for the new, but undamaged, and works because now.
But the disc still need to scan and, best of all in PIO mode under Windows, but it should not be x64. Or just under DOS th. - tristian.Baumbach commented on March 20th 20 at 13:57
@Trent, I have windows 7 64 bit - Arvid commented on March 20th 20 at 14:00
@Trent, ie may still be problems there roughly in a week?
what is pio mode? - Arvid commented on March 20th 20 at 14:03
@Jodie, the fact of the matter is, you can, even after 15 minutes, an hour...
On your first screenshot (in the question)
5ccd74ff6ffaa848384786.jpeg
Look in the upper right corner, there is a switch between modes API - PIO
First vysokourovnenvye, the second low-level (if simplistic). In PIO mode, you can create a disk terrible and necessary things, that is almost all. - tristian.Baumbach commented on March 20th 20 at 14:06
@Trent, not to check when rebooting? can be in this mode? ie relatively speaking
went to chrome
downloaded the web version
and included PIO mode
? - Arvid commented on March 20th 20 at 14:09
@Jodie, I do not understand what reboot? What the web version? - tristian.Baumbach commented on March 20th 20 at 14:12
@Trent, hmm
don't even know how to describe
well Windows we put in making a flash drive bootable - Arvid commented on March 20th 20 at 14:15
@Jodie, so you can't do it in Windows, you have Windows x64, and switching to PIO only possible in 32-bit versions of Windows. So I have to boot from the stick and run the DOS version of the program. - tristian.Baumbach commented on March 20th 20 at 14:18
@Trent, and the DOS version has only one mode -PIO? - Arvid commented on March 20th 20 at 14:21
@Jodie, Yes, this is its limit, in addition to outdated. - tristian.Baumbach commented on March 20th 20 at 14:24
@Trent, yeah
You are right
And that means on disk is corrupt the partition table? - Arvid commented on March 20th 20 at 14:27
@Jodie, the table storing the partitions, so the boot information, folders, files.
To restore the partition, you can try utilities such as Paragon, Acronis, MiniTool

for example, these are free:
dl.paragon-software.com/free/rk14_free_ru.exe
dl.paragon-software.com/free/PM14_XP_ea_x32.exe - tristian.Baumbach commented on March 20th 20 at 14:30

Find more questions by tags Hard disks