How to raise a simple trunk on the device D-link DES-3526?

How to raise a simple trunk on the device D-link DES-3526?

here's the screenshots.

the fact is that in the menu as there is no such word trunk. But there is a Link Aggregation Group Configuration.
I did not get... in the screenshot the second I got to 25 and 26 port was the sedation. show as?

these two ports gigs and the rest 100 work. the problem is that common trunk, in which there are lots of Wilanow, is connected to gig port 25. vlani out of 100 full-duplex ports, now it is necessary that the same trunk, which comes on the 25th continued its way with the release on the 26th the port...

as an example to do it. please help.

5cf8387aad51e830414515.jpeg5cf838887aebb023602938.jpeg

trying here as in the photo

5cf839cb82fcb890794909.jpeg

and I get this.

5cf839e047a3c678605275.jpeg
March 23rd 20 at 19:17
2 answers
March 23rd 20 at 19:19
Solution
link aggregation allows you to combine multiple physical channels into one logical. To wlanap and trunks has no relation.

D-link DES-3526 - this is the old buggy G. IMHO

Through the console:
# create vlan 100 tag 100
# config vlan default delete 1-16
# config vlan add 100 untagged 1-16
# config vlan 100 add tagged 25-26
# show vlan

The same way other ports are configured.

Don't forget:
# save
In principle, it would be a great addition approval "is in the web interfaces of network pieces of iron about 70% efficiency, the rest in console" :)
Microflow Vaughn tried to make a web muzzle and some of the subtleties only using stand, the same macadress interface change, although it may have said for a long time in GUI did not look :) - Danielle_Blanda commented on March 23rd 20 at 19:22
March 23rd 20 at 19:21
config vlan default delete 1-16

Fail ! VLAN deletion error !
@Ward.Haag
config vlan default delete 1-16
Fail ! VLAN deletion error !

It is necessary to review the response to write.

show vlan show - Efrain commented on March 23rd 20 at 19:24
In short, thank you very much. I did it as You gave an example, and it worked. By the way, went through the console, but changed my mind and did everything through the web. I have two such switches, checked the trunk, everything works.
only this defaulty were not removed... hell with him...

still all ports on default... and none marked as he is not an obstacle... Thank you very much. - Ward.Haag commented on March 23rd 20 at 19:27
@Ward.Haag,
In short, thank you very much. I did it as You gave an example, and it worked.

so I'll solution my answer, not yours. L - logic

all ports on default none noted

So they are not in the default vlan was before. - Efrain commented on March 23rd 20 at 19:30
@Efrain, I'm sorry, I probably accidentally said mine, now corrected. the marked solution is Your answer. - Ward.Haag commented on March 23rd 20 at 19:33

Find more questions by tags Network administrationD-LinkComputer networks