1c how to configure counterparty?

Good day.
Connoisseurs 1C the following problem, please help.
1.when you are making contractor the machine put a checkmark buyer
2.the contract was also down but not so with the buyer.
3.if these actions were varied that would give you an error.

All write thank you.
April 3rd 20 at 17:20
2 answers
April 3rd 20 at 17:22
The first two points look in the settings. In some configurations they are.
Third paragraph - invite the programmer and give him TK, let him write.
on the first two items in the Configurator, almost all climbed the but to find exactly where these settings are specified
could not get a 3rd item is not particularly important in the future, it can be approached. - Reuben_Ziemann commented on April 3rd 20 at 17:25
@Reuben_Ziemann,
on the first two items in the Configurator, almost all climbed the
The Configurator is a tool for writing, editing, and service configurations.
From there they come from?????? - britney86 commented on April 3rd 20 at 17:28
@britney86,
In the 1C full permissions in the settings present.
Hence the climb in a Configurator there are forms of elements where the whole thing edited need just a little advice on the specification. - Reuben_Ziemann commented on April 3rd 20 at 17:31
@Reuben_Ziemann,
Hence the climb in a Configurator there are forms of elements where the whole thing edited need just a little advice on the specification.
Don't see the logic.
In the Configurator climb when you need to rewrite the configuration.
The user in the Configurator to do absolutely nothing. - britney86 commented on April 3rd 20 at 17:34
@Reuben_Ziemann,
In the 1C full permissions in the settings present.
Well, maybe in your configuration and there are no such settings.
They're not needed everywhere.
For example why are they in 1C Management of poultry farm? - britney86 commented on April 3rd 20 at 17:37
@britney86,
The moment once again that if you specify no please do not give "advice" as in 1C in settings to go.
The user does not give Full rights. - Reuben_Ziemann commented on April 3rd 20 at 17:40
@Reuben_Ziemann, the answer you have already given: 1 and 2 can be set in user settings.
Whether they are there or not - depends on the specific configuration that you have not voiced.
In typical configurations available to the user its settings and it can change the default values that are substituted when creating new directories and documents. In some configurations, the settings access is given only to administrators.

The Configurator allows you to edit the "configuration" is a declarative description of the structure of data storage and algorithms for their processing. The information itself (including settings) is stored directly in the database and available only in the "enterprise". Historically, the exception to this is a list of users and the available roles for them, but the modern programs using the BSP is not recommended to use only the appropriate tools from the section user management. - maida.Cremin commented on April 3rd 20 at 17:43
@Reuben_Ziemann,
The moment once again that if you specify no please do not give "advice" as in 1C in settings to go.
What could be clarified if I don't know what your configuration is.
You about it modestly hold back.
At 1C there are two platform 1C 7.7 and 1C 8.x for each platform written tens of thousands of misconfiguration on all occasions, from jewelry trade, to the organization of work sewing Studio.
Each configuration - hundreds releases.
And in each case, settings can be located in different places, or they might not be.

What kind of specifics we can talk if you are not aware what program is it?
Want specifically - specify the release number of the platform, the name of the name and release number of the configuration. - britney86 commented on April 3rd 20 at 17:46
1C 8.3 (8.3.10.2252).
Configuration:
Manufacturing enterprise management, revision 1.1 (1.1.5.5) - Reuben_Ziemann commented on April 3rd 20 at 17:49
@maida.Cremin,
1C 8.3 (8.3.10.2252).
Configuration:
Manufacturing enterprise management, revision 1.1 (1.1.5.5) - Reuben_Ziemann commented on April 3rd 20 at 17:52
@Reuben_Ziemann, UPP 1.1.5.5 ? Haven't updated for ten years? - britney86 commented on April 3rd 20 at 17:55
@Reuben_Ziemannin UPP all the user settings available from the card directory users. - maida.Cremin commented on April 3rd 20 at 17:58
UPP 1.1.5.5 ? Haven't updated for ten years?
@britney86,
Most likely - Reuben_Ziemann commented on April 3rd 20 at 18:01
April 3rd 20 at 17:24
Follow these steps of documents Implementation.
If you take a typical configuration, the prescribed to need a show filled.

And so, you will create an Extension in which to replace the code to fill in the new item.

ps:
neplohoy will announce what configuration work
v8.1c.ru/solutions/applied_solutions.htm
1C 8.3 (8.3.10.2252).
Configuration:
Manufacturing enterprise management, revision 1.1 (1.1.5.5) - Reuben_Ziemann commented on April 3rd 20 at 17:27
Full interface - Service \ user Settings
either
Administrirovanie users \ Users \ Users
find the desired user and to options.Svedenij \ Preferences

In open nastrojkah looking for a branch
"Core values for lookup and reference"

Although such ancient may be different. - johnathan commented on April 3rd 20 at 17:30

Find more questions by tags 1C