There is now an Office area with a server where everything works according to the standard
From the back cable to an industrial building, about 100 meters in the building there are 4 switch to interchange networks inside buildings.
There are also various buildings nearby, but I can't pull the cable, because there are still construction works and travels technique (in the air pull cable or as), underground - too not a variant
read here about the linkup
so the question is, if I install from linkup industrial building in semi-detached buildings, whether I'm there to deploy a LAN? i.e. to set the switch
100 meters - just for some powerful WiFi transmitter and receiver with a good antenna, go for it, it's cheaper than to put the "plate", for example.
cecile answered on April 7th 20 at 10:54
Can ubiquinty nanostation
Samara answered on April 7th 20 at 10:56
Ubiquinty - need 2 PCs. (works up to 15 km + PoE). If the frequency of 2.4 zashumela, it is better on 5 GHz. Configured as client-server and a bridge (bridge) forwarding DHCP. After configuration, make the SSID invisible. But we must remember that it is Wi-Fi. Mikrotik is also possible, but it's SOHO. (Small office/home office).
Wayne.Volkman answered on April 7th 20 at 10:58
The main condition that the buildings were in line of sight
The pair aimed Ubiquinty on each link, or if buildings in the same plane it is possible pie
and they continue to breed for arbitrarily switches
Before buying, preferably at least by phone to carry out approximate radioblagon
Fausto_Bosco10 answered on April 7th 20 at 11:00
Read about the TP-LINK CPE210 breaks up to 4 km in a straight line