Why Mac doesn't see the boot part of the flash with the booth?
Hi all,
allocated 10GB on the drive under Linux, put the iso through the terminal without errors.
Mac stopped to see this part of the stick in Findre that the fact that a part of this bootable.
When I reboot the Mac and press option, you only see Makovsky hard, and the stick is not(that is, its boot part)
Why?
1 answer
Hi,
Most likely in "filled to the iso through the terminal" was not created bootable structure on the flash drive. Filled what or how?
Find more questions by tags IronmacOSHard disksKali
dd if=/kali.iso of=/dev/disk2s2
this commandHere is a flash drive now :
We need those 10 Gb to make a MS-DOS (FAT32), then it is better to take unetbootin and roll back your isoshnik. - nicklaus.OKeefe commented on June 10th 19 at 14:58
I think the problem is that you cannot boot from a piece of stick. When I'm on the same flash drive filled Kali full, i.e. not /dev/dev2s2, a /dev/dev2 worked - krista.Eichma commented on June 10th 19 at 15:10