How to safely configure a mikrotik rb2011 as a media Converter?

There is office network. The Internet comes to optics. As RB750Gr3 router Mikrotik on ether1 is configured white static ip. He copes with the duties, but does not have an optical port. As is Mikrotik RB2011UiAS which is idle. The question is how to safely configure a second router (rb2011) to exclusively broadcast the signal from optics on copper wire, without having to reconfigure the first (rb750gr3).

PS. As optics is being translated doesn't matter.
April 19th 20 at 12:29
1 answer
April 19th 20 at 12:31
Solution
  1. Reset all settings rb2011 reset to abandon the use of standard
  2. Combine with bridge optics with ethernet port
...to set password so 2011 was not a router under a false beginning, kill unnecessary services - trycia.Howe commented on April 19th 20 at 12:34
What to do with the addressing? What ip to assign to the bridge? - Aiden commented on April 19th 20 at 12:37
@Aiden, Yes, what you want. Unable to safety do not assign to bridge worked purely media Converter
But then the settings will have to connect via a different port - christy_Strom commented on April 19th 20 at 12:40
Thank you all! Question learned ;) - Aiden commented on April 19th 20 at 12:43
@christy_Strom, enable RoMON and any addresses not need any other ports. - lucile_Auer commented on April 19th 20 at 12:46

Find more questions by tags Mikrotik