How to return the 8 GB RAM?

Hello everybody, I began to notice a hang in the PC. Decided to check the properties of the PC and is displayed instead of the 16GB was 8 GB. RAM years, like the whole PC. In device Manager only displays 1 die. What to do?
June 14th 19 at 18:21
1 answer
June 14th 19 at 18:23
Solution
Reveal, see how many of them physically. If it is one, then skomunizdil.
If there are two of them, then:
Pull both and check the volume label
To blow out dust in the slot and wipe the contacts with a soft eraser on the strap
To insert one by one and test the computer
Finding the dead once again to wipe all, re-check and to go shopping for a new
fun)) after 2 showdown with this "Friend" of the corps flew the thing in which is screwed the bolt holding the motherboard))) and left in the motherboard. It was great to pull it out.

No luck with friends( - wava_Casp commented on June 14th 19 at 18:56
I have a very strange PC.
In the beginning I pulled one, it's on and everything is OK.
Then I swapped them. (Ie one inside) And the monitor ceased to turn on. Says no signal.
And now the same thing but with working ideas. 2 times were collected PC. During procedure monitor does not turn on. I don't know what made these 2 times my friend. But there is a picture. What could be the reason? - wava_Casp commented on June 14th 19 at 18:26
and now the same thing, but consciously write. Read more - Kiley33 commented on June 14th 19 at 18:29
I confused:(

Can't find the box from the planks, and all the other boxes have.. hmm
Necessary checks to find...
Ehh zagrocki nights goodbye.

I asked him what he did. To monitor seen PC.

Now 2 problem. The monitor does not see the computer. From videokarty is not a signal. Hence the reason that the motherboard is not connected. Probably... - wava_Casp commented on June 14th 19 at 18:32
this has repeated itself but when you build a PC.
2 times he was going and so well behaved as it is now.
But why? - wava_Casp commented on June 14th 19 at 18:35
I little genius - wava_Casp commented on June 14th 19 at 18:38
I have succeeded!!!!
I have!
CTE devushki have to learn to be a programmer,but not knowing how to correctly insert the RAM! Oh my God
!

My studies taught to disassemble and reassemble a PC.

Tell me how solved this problem.

I took a look the video how to insert the RAM. I decided to try to insert them into another connector. ( I have 4)

Included PC. And Oh my God 16 GB!

Hurray. Now rust at top speed this will not be^_^

Then it turns out... I have a burned connector?
MB the dust. Because my friend could not paste cover away from the motherboard, so that opened a single usb connector.

I even have a cobweb inside was:/
The spider was probralsya.

More and more PCs will not touch. And the gap with the outputs of the motherboard has to close... - wava_Casp commented on June 14th 19 at 18:41
what You have there with usb? Toss us photos, even in your own eyes view. Collected PC yourself? Comrade? I can smell that Your companion game. - Leonard.Bos commented on June 14th 19 at 18:44
I will try to find))
Thank you all for the help! - wava_Casp commented on June 14th 19 at 18:47
due to the cap of the motherboard one usb cannot be used.
I think the problem is that the motherboard somewhere above and somewhere below. Not exactly as it is.... - wava_Casp commented on June 14th 19 at 18:50
above/below is a direct indication that the Assembly is serious errors. What are the risks? Well, for example, the mother on the case can short. What will be expressed? But as luck. - Leonard.Bos commented on June 14th 19 at 18:53

Find more questions by tags ComputersMemory