How to properly install a PSU with a large ventilation in the chassis?

A case chenbro sr107. As you can see the compartment for the PSU is separated from the main space by a continuous wall will survive in such conditions 750w PSU Aerocool higgs? When you install it fan down it will fall on the wall, and when installed upside down the gap between the roof and the grid of the fan will be around 1cm or less. At the moment in the area of the PSU housing cover noticeably heats up from BP constantly goes the hot air. What can be done in addition to replacing the PSU/case?
June 14th 19 at 18:52
1 answer
June 14th 19 at 18:54
The fan can be seen (it sucks air out of the case) that this model PSU must be installed from the bottom, otherwise it will banish the hot air.
In all servers, using the principle of "front - flow of cold, the back - flow of hot", and therefore such a separation of air flow near the PSU.

Find more questions by tags Iron