Is there a setting in the Unifi controller on a different subnet?

Need advice to set up. There is a working network 192.168.1.XX
Gateway - 192.168.1.1 Unifi controller (firmware 4.3.11.4852825)
Then there is a managed router D-link 1100-24p
The router comes 5 pieces UniFi AP-LR (firmware 3.3.19.4015)
Addresses the prescribed static 192.168.1.XX
And these points give out the ip from the same pool (192.168.1.XX)

Is there a setting on the controller that would be points handed out for example (192.168.0.XX)?

I thought to configure VLANs but maybe is there another solution I don't know...
June 14th 19 at 19:02
2 answers
June 14th 19 at 19:04
Solution
to lift dhcp on the controller ?
dhsp enabled on it and gives the address 192.168.1.XX

I need a working PC in 192.168.1.XX but the guests who connect. wi-fi received 192.168.0.XX - nikita.Stracke commented on June 14th 19 at 19:07
you need to make the point in a separate VLAN, did this on Mikrotik - Collin_Gutmann commented on June 14th 19 at 19:10
June 14th 19 at 19:06
Solution

Find more questions by tags Computer networksSystem administration