How to configure two router in tandem?

Have modem Promsvyaz M-200A and TP-Link TL-WR720N. To the network I have connected M-200A PPPOE software, then plugged the TP-Link and TP-Link have in turn connected the server:
59d2385245308295873821.png
then open the ports I need ports:
59d23898cc062345564302.png
The Promsvyaz the next picture is a DHCP connection:
59d238ee11e52867648113.png
The virtual server table:
59d2391666b1b816979092.png

However telnet says something's wrong here:
C:\Users\12222>telnet 192.168.0.106 80
Connecting to 192.168.0.106...failed to open connection to this node, on port 80: connection Failed

C:\Users\12222>telnet 192.168.0.106 80
Connecting to 192.168.0.106...failed to open connection to this node, on port 80: connection Failed

C:\Users\12222>telnet 192.168.1.2 80
Connecting to 192.168.1.2...could Not open connection to this node, on port 80: connection Failed

C:\Users\12222>telnet 192.168.1.2 22
Connecting to 192.168.1.2...could Not open connection to this node, on port 22: connection Failed


What could be the problem?
1 answer
June 14th 19 at 20:52
connect the laptop connected to the TP-Link have via wifi, the IP of laptop 192.168.0.100 within the network.

"Virtual server" on the router is port forwarding NATом WAN -> LAN. You can't test port forwarding from inside the network. You need to connect to external IP of your functional tests or to connect the cable to the LAN port of Promsvyaz and knock on TP-Link.

But, you first need to check recordatio in the comments
When connected via LAN to the M-200A - ping 192.168.0.106 to not go, but when connected to TP-Link u - go, but again, the ports connect not obtained. - gunnar.Barrows commented on June 14th 19 at 20:55
the answers are here https://www.fl.ru/ - katherine_Schuster commented on June 14th 19 at 20:58

Find more questions by tags Network equipmentNetwork administrationNetwork routingComputer networksTP-Link