Questions tagged [Adaptec] (24)

1
answer

If the hardware RAID controller of the company Adaptec?

How popular and effective hardware RAID controllers from Adaptec? Found here for such a cheap device. Either look in the direction of LSI and Intel that cost 30k minimum ?
Ephraim_Boyer asked March 27th 20 at 13:08
1
answer

How to get ESXI to see the RAID 1 HDD?

Hello everybody. You have a server Supermicro X9SCL/X9SCM. Intel Xeon E3-1270V2. RAID controller Adaptec 6805. Have installed ESXI 5.5 release 1331820. RAID1 - 2pcs. ( HDD - 2х2Tb - that is to say the reserve, and 2х500Gb - main RAID which turns ESXi and VM). There was a need to move the main RAID to a new Intel SSD 900Gb. ...
Matt_Wintheiser asked March 24th 20 at 13:34
2
answers

How to solve the problem with configuring a RAID array?

Set me on Hetzner server. For my RAID controller. you may order the caching system. Is it worth fooling with any upgrades to a dedicated server? In my case, when if you have installed a SSD (for data center) and set the SMART monitoring system.
emmalee_Bahringer asked March 14th 20 at 14:42
11
answers

RAID 1 (mirror) transferring to other large HDD

You have a server with RAID controller Adaptec 2405 m the two screws in RAID 1 to 130 GB. There is a need to replace the screws on the other 450 GB. Is it possible to do without software like the Acronis? What?
Andres43 asked October 7th 19 at 20:22
4
answers

RAID 1 on Adaptec B2348 and Proxmox(Debian) — how to win?

Good time of day! Such a poser: There is a new server Depo Storm 2300N5. It 2 SATA HDD 2TB. A built-in utility is configured for Raid first but Proxmox 2.1 and pure Debian see it as 2 different disk, and when installing the system on one of them, the array collapses. Is it possible to make it so that when you install Proxmo...
tyler_Cassin asked October 7th 19 at 15:26
1
answer

Why do I get Dirty after fsck FS on RAID1 Adaptec RAID 3405?

Good day, community. The machine is OpenSUSE: oraprod:~ # uname-a Oraprod Linux 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux oraprod:~ # cat /etc/*release* openSUSE 11.2 (x86_64) VERSION = 11.2 Partition / is on a RAID1 mirror on Adaptec 3405 RAID. Once after reboot the p...
baylee.Stehr68 asked September 26th 19 at 20:36
0
answer

Maxview doesn't see the controller on vmware why?

There is a server on which vmware is installed to it from another server mounted the RAID 5 so on the server where vmware has two ssd drive to use as cache for the RAID . On vmWare installed vib files adapteca . On the guest OS installed MAXVIEW storage Manager and tell her to connect to the host ( vmware) he says that he s...
felipe.Prosacco96 asked September 23rd 19 at 20:29
3
answers

How risky ordinary budget SATA-screws for Adaptec ASR-6805?

Actually, a subject. Spinning will be under ESXi. To clarify the question — how often conventional screws to take off from the RAID5 array? How need to bother about it? Please describe a personal experience, if any.
Soledad51 asked September 21st 19 at 00:53
2
answers

Is it possible to physically move the disk drives that are in RAID?

Have inherited a server with a Apaptec 6805, which when assembled was very crooked connected disk numbers in the basket do not correspond to the numbers in the interface controller. Accordingly, it is necessary to change the connection ports to have almost all discs. You can just turn off the server and reconnect the drives...
katheryn_Daugher asked September 15th 19 at 19:44
1
answer

I want the raid controller?

Good day! Set up monitoring of the raid controller Adaptec 6805E. The raid10 array. In case the disks will start to bend over I need some kind of signal. In the built-in utilitke is sending emails via smtp. The letter comes. But there is sadness. (Not Supported) What do I want controller? "ADAPTEC BY PMC EMAIL NOTIFICATION ...
nyasia.Olson asked September 15th 19 at 10:51