Questions tagged [Elastix] (85)

0
answer

How to connect an analog phone through the card of IP-telephony to Issabel?

Good afternoon. Just say maybe noob question, but the answer I have not found him. Is the server stuck in a charge IP telephony A800E analog Board 8-ports PCI Express slot. In three slots on the PCB Board is inserted FXO and three FXS motherboard other. In Issabel, a former Elastix, the Board decided. Here's how to configur...
caden.Man asked March 27th 20 at 13:08
1
answer

You can dismiss caller name, and leave only when the incoming caller id from trunk?

Configured the trunk with the other office, they peredayut we call id and call name, the problem is that the call name on the side wound up in Russian, and some phone numbers on our side do not understand Russian language and hang out with incoming calls. I can at once dismiss this call name?
isaiah.Hammes asked March 24th 20 at 11:57
1
answer

Compatible drivers chan_sip and chan_pjsip?

That is, I can to the old elastix 2.4, which is nothing about pjsip doesn't know to connect pjsip trunk from the new FreePBX? Or need to use a chan_sip trunk?
ulices.Kuhn asked March 21st 20 at 12:19
1
answer

As to do so would be logging Calls and written to the second HDD?

Hello Centos 7 , FreePBX 13, added a new HDD to 100 GB , that would have to have written logs and records of conversations. Please tell me how to implement it ?
Shaina48 asked March 19th 20 at 18:47
2
answers

FreePBX how to configure call recording, outbound routing?

Hello , please help. FreePBX 13 and Asterisk 13 , you need to configure the outbound routing entry , so that she would have started immediately after the set and not after answer. Established Call Recording on Forсe in outbound routes for Extensions is also on the transcripts all set Forсe . nothing helped . How to do all ...
Patricia24 asked March 17th 20 at 11:41
2
answers

How to configure network settings in Asterisk 11 (Centos7, Issabel4, chan-dongle)?

Good time. Gathered in the office the Asterisk server - a free-standing machine Centos7, Issabel4, intranet of the four modem huawei E1550 connected directly to the server. The server is connected to office network, there is connected and IP phones (grandstream, and cisco). Internet network comes through a router zyxel cene...
sierra_Glover asked March 17th 20 at 09:22
0
answer

How to create a shared address book of several Grandstream gxp1400 on the Asterisk server (Isabel4)?

Created a server of IP telephony. System Issabel 4, asterisk 11, Centos 7, vneshke - 4 modem e1550 and ZTE8710 module chan_dongle, the extension numbers on the devices Grandstream GXP1400, 3 pieces. In General, everything works, but it is not clear who's calling from vneski. When an incoming call, the apparatus indicates th...
estevan.Breitenberg asked March 17th 20 at 08:23
1
answer

Why does not the group of numbers for incoming calls (issabel 4, asterisk 11)?

First time setting up a server of ip telephony. System virtual-box, Issabel 4, asterisk 11, vneshke - two modem e1550 module chan_dongle. Set up the trunks modems, three internal rooms 100, 101, 102. Also set up incoming and Outgoing routes. Everything is OK, calling in all directions. The problem appeared when I created a...
garfield.Kris asked March 16th 20 at 14:19
0
answer

How to set outgoing call?

Hello, tell me how to set outgoing call? The situation is, the office is the Asterisk server, it store external IP connected voice gateway, Grandstream HT813 is connected to an analog line(FXO configured as a trunk in asterisk) of this store and an analog telephone (FXS configured as an extension in asterisk), when an incom...
Helene12 asked March 15th 20 at 23:27
1
answer

Elastix how to determine the number?

Good afternoon everyone! On my elastix extension is (111), connected to it through the trunk to another asterisk. Asterisk is configured on that routing (if a number, then the call goes out to our trunk). On my side, I see calls coming in as SIP/111. Ie on my phones incoming is defined as 111. Whether it is possible to see...
carolanne asked March 13th 20 at 13:50