Questions tagged [Mikrotik] (1681)

1
answer

How to use your DIUD in Mikrotik?

Hello.! I want to configure Mikrotik dhcp server static ipv6. For example, see my on my DIUD , in ipconfig /all create a binding and enter my Mikrotik DIUD not accept. of course remove the slashes. what's the problem?
solon97 asked April 19th 20 at 12:48
1
answer

What kind of trash in the DNS cache on Mikrotik?

What could it be? Drew attention but failed to purchase why. DNS blocked from the outside applications.
brycen85 asked April 19th 20 at 12:34
4
answers

Than to strengthen wi-fi on MikroTik hAP ac2?

Good afternoon. A MikroTik hAP ac2, serves as a switch (just amplifies the passing signal). There is a need to distribute wi-fi at this point, but the device is in a metal box (make sure the wires do not lie in the mind) - the signal is suppressed much, to use unreal. Need a solution. Questions: Is it possible to MikroT...
esperanza asked April 19th 20 at 12:32
1
answer

How to safely configure a mikrotik rb2011 as a media Converter?

There is office network. The Internet comes to optics. As RB750Gr3 router Mikrotik on ether1 is configured white static ip. He copes with the duties, but does not have an optical port. As is Mikrotik RB2011UiAS which is idle. The question is how to safely configure a second router (rb2011) to exclusively broadcast the signa...
Aiden asked April 19th 20 at 12:29
1
answer

The script add a variable address?

Salute. Task: to add to the number of mikrotiks 192.168.1.1 192.168.2.1, etc addresses to the ip tunnel. The question of how to automate this? If it is known that, for example, 192.168.1.1 - will address 172.0.1.1 to 192.168.2.1 - 172.0.2.1 ip address add address=172.0.1.1/32 interface=IP_tunnel network=172.0.1.1 . Usually...
francesco.Zulauf asked April 19th 20 at 12:22
1
answer

Where can I see the names of the clients?

Where can I see the names of customers except kid control? Not the IP, mac and name.
lola_Skiles asked April 19th 20 at 12:14
2
answers

The choice of router for the task SSTP server?

Advise on a particular task, up to 70 users it as a peak, up to 50Mb, the client access server SSTP
Yadira96 asked April 19th 20 at 12:14
4
answers

How to ensure the safety of the L2TP VPN on mikrotik?

Connected two Mikrotik via VPN on the manual. Then added firewall rules in input and forward with this option: And found that all vpn traffic corresponds to them. What does it mean that I have not set up encryption? But ipsec proposal aes-256, that's all. Something wrong?
Mac_Torphy asked April 19th 20 at 12:12
3
answers

Why there is no VPN connection between networks without NAT masquerade?

Hello, the question seems simple, but I can not understand. Here's an example network diagram The router And the client Router B server The router And gets an ip address 192.168.1.10. In the chain one NAT rule masquerading on public interface for Internet access. In this configuration, router A pings router B. Compute...
Kelsi_Daugherty asked April 19th 20 at 12:10
1
answer

Mikrotik L2tp ipsec vpn — why not ping the local network?

There is a network for MicroTCA 192.168.0.0/24 raised l2tp ipsec server 10.63.10.0/24 In the LAN there is a PC 192.168.0.66 to which you want to access via smb Problem: When connecting via VPN -This PC was not pinged -On the PC you can go via RDP -On this PC can not go on the SMB PS similarly configured 3 router at other ...
declan.Robe asked April 19th 20 at 12:10