Questions tagged [Quadrocopter] (71)

1
answer

Where to find the diagram of the Board?

Quadcopter SIM x5hc can't find a diagram for the remote I want to find the pin with the ppm signal that would connect to the computer can anyone help? a photo which shows where the ppm signal
Lucio_Daugherty asked April 18th 20 at 12:42
1
answer

Do I need to register Syma X25Pro?

Recently became the owner of the copter Syma X25Pro (wife of 23 presented). In different sources write about the need for its registration. I weighed on the kitchen scales showed 253 grams, that would hint about the need to register. But at the same rc-today you write that it is not necessary. There are brothers in arms her...
Forest asked April 7th 20 at 16:26
3
answers

How are things with the quadrocopter FPV?

Good day, pilots and video makers! Really need your help in clarifying the situation with the quadrocopter FPV. 1)drone FPV harvested yourself or you can buy ready-made Assembly? Which is better of these options? 2)Which brand of components or finished assemblies drone is best for shooting semi-professional and professio...
Kathryn84 asked April 7th 20 at 16:24
1
answer

How to reduce heating of the li-pol battery on the drone DJI M2P from sunlight?

Good day! We have a drone DJI Mavic Pro 2. Batteries for this drone Li-pol. Fly only in Sunny weather when the temperature is on average +28 Fly to the sun in the Inferno. Battery heats up from the sun, from natural discharge (probably) at the time of discharge to 20% I immediately put it on charge in the shade. When cha...
Orio asked April 7th 20 at 09:30
3
answers

Why cut down the drone when the revs increase?

The bottom line when motors without screws, everything is OK, increase the revs, all is well. As soon as hang up the screws and increase the revs, the drone is completely cut down. As if the power was cut off. Powered by a LiPo 3.7 V.
zoe_Hay asked April 4th 20 at 01:14
5
answers

How to increase the lifting force of the drone?

Drawing crazepony mini I assembled my drone, rewrote the firmware, but in the end my build turned out a total weight of 81g, while the Chinese 46d. Put a brushless engines 55000 rpm, each at a voltage of 3.7 V and propeller 75mm. While trying to take off not enough thrust, measured on the kitchen scales, the weight drops ro...
berenice.Sawayn68 asked April 3rd 20 at 16:42
0
answer

Budget quadcopter for Google Maps?

Hello The last time I travel around the country and are often faced with the fact that you can't see the normal panorama of a particular area/location, and existing photos are far from the desired quality. The topic of copters I do not rummage, therefore I ask your advice. I need a copter that I can fill with 360° panoramas...
Javonte.Adams asked March 27th 20 at 13:27
4
answers

How to choose a quadracopter for inventory? and how to take inventory?

Interesting experience in the selection and the advice of those who have already encountered. The problem is this: 1.Inventory in the warehouse . 2.Automatic flight. 3.What are the readers to use (bar code) RFID tags . 4.What quadracopter is needed for such purposes.
Vida_Pfeffer16 asked March 23rd 20 at 19:54
3
answers

Anti plug on the drone? Strengthening sustainability?

There are many different types of plugs drones. Interested in following what happens to the drone when it jammed? He falls? Or lose control but remains hanging in the air? Well, the main question is how to improve the stability of the drone in case plugs? At least to bring him home.
electa_Rolfson asked March 21st 20 at 12:47
2
answers

How to build a stream in memory, and stream?

Guys, want to increase the flight time of your Quadra and as one of the ways is to compress the video stream from the camera on the PU to the minimum resolution needed to control to reduce energopotreblenie during data transfer. Thus high-quality recording with the same camera will be recorded on the memory card. How to imp...
Misael91 asked March 21st 20 at 11:57