Questions tagged [SCSI] (11)

2
answers

Migration from one RAID controller to another

Good afternoon. There is a server(performs the functions of a PDC) with a SCSI RAID controller. There is a desire to move to SATA, for existing skazi screws are already starting to act up. As far as I know, they were discontinued, so we need to move now before it was complete ass, then the same steps not to do in an emergen...
izabella_Jaskols asked October 14th 19 at 10:16
9
answers

What's the Pont SAS?

What is the meaning of the parallel existence and development of a separate standard when SATA SAS develops and draws inspiration from the same SCSI and why SAS/SCSI-Vinci have other containers (and enigmatic multiplicity) and usually higher speed (while on the bandwidth limitation with the existence of SATA 3 is like as no...
Theron_Runolfsdottir35 asked October 7th 19 at 19:45
1
answer

PCI64 SCSI Controller + SCSI HDD on a Pentium I?

Continuing the theme of "PCI-SATA controller on the first Pentium". An alternative way of improving the performance of the disk subsystem Pentium I by installing the SCSI Controller Tekram DC-390U3W PCI 64 and IBM Ultrastar 36LZX DDYS-T09170 9.1 Gb. With jumpers on the controller Board no problems: only three jumper — the f...
gus78 asked October 3rd 19 at 15:05
3
answers

How to migrate SCSI storage on another server?

There is an old HP DL380G4 server that is connected to a SCSI storage in Windows created 4 HDD in this store. You have to move all to another server DL380G5, if I connect the repository, I have these same drives will be determined?
Assunta57 asked September 27th 19 at 13:13
3
answers

How to check SCSI hard drives?

For several years, accumulated a large number of SCSI/SAS drives that just fell out of RAID and put them back, well, I do not want that... now there are time that you can check, but found nothing good. (bad searcher) That you can use to check up and down? (Drives from different manufacturers)
willie.Schamberger86 asked September 24th 19 at 17:28
2
answers

What HDD you can change the disk in the RAID controller?

Good day, there is server HP ProLiant DL160 G5 with a hardware RAID controller the LSISAS1064E. It has two 250GB SATA drives, mirrored RAID1 array. Question: on which drive, if necessary you can replace one drives in a raid array? Enough any volume? I could be wrong, but the distributor said we need exactly the same. In ot...
Stanford asked September 19th 19 at 19:03
3
answers

SCSI driver under Linux, is there such?

Good day! There are SCSI drives manufactured by hp invent with the mark on the casing WIDE ULTRA320 SCSI. On previous bitter experience I remember that this hard drive was not able to install Linux due to the lack of drivers thereof. Asking the community to help, maybe someone at work/home have such discs and they successfu...
Willow.Pouros15 asked September 19th 19 at 15:28
1
answer

Difference write scsi in Windows and Linux?

Hello. I will adapt the program under linux (Ubuntu) that has already been written on windows. This app works with the device developed by my colleague. The device (FAT32) connected to a PC, and is defined as a USB flash drive, a scsi Protocol. Later in my program the file is written to that device, and then there is the tr...
Kory_Kshlerin asked September 19th 19 at 00:01
1
answer

How to connect disk array to the server?

Hello. On the server (proliant with a scsi adapter) installed Debian. A disk array. Web-face was created on this raid array. There is a problem connecting and definition of the array with the server. The adapter has a BIOS and it sees the array, but the settings like "to link the server and the array" nope, drivers on the I...
Oceane57 asked September 15th 19 at 15:19
0
answer

Configure the HP NetRAID-1M Controller does not see screws, how to adjust?

There is an old server NetServer LC 2000 U3 with 3 screw on 18 GB SCSI. Wanted to try to install Windows XP. Faced with the fact that HP NetRAID-1M gives 0 logical drive found I decided to create them at startup pressed ctrl + m went to menu adapters -> phisical drive, but it's empty. You need to configure?
nikita.Stracke asked September 15th 19 at 11:16