Questions tagged [Soldering] (73)

3
answers

No picture on monitor, what's the problem?

Good day, nick. Start from the beginning. Generally any old iron, a lot of dusty computer components and nothing better to do I decided to collect some sort of computer out of this, not very much bothered about the dust I gathered from what he found sistemnik old 2-core AMD x64 5000+ 2 gig DDR 2 RAM, 400w PSU on and what o...
aleen.Senger asked April 9th 20 at 09:48
1
answer

In what may be a faulty keyboard?

Good day! There keyboard Logitech Internet Keyboard Y-ST39 PS/2. spoiler He served faithfully for 15 years, worked fine, after I switched on the laptop, when there was a return to the hospital got her and decided to connect and as it turned out, it stopped working (tried on several computers). Understand that the keyboard ...
Tracey.Conroy asked April 8th 20 at 17:27
1
answer

No sound, burn the fuse Sony str-db930 qs?

Hi all, this problem, at one point, listening to music, not really loud, once, amp went into protection, turned off, turned on, it worked for a second and again in defense, then turned off, turned on, it's on but the sound is not deduced Took apart, found 2 burned fuse (125V 8A) on-Board DC Ran, I bought 2 fuse (250V 8A) ...
Jess_Ryan asked April 8th 20 at 10:04
2
answers

Not the monitor turns on while the lamp is lit. What could be the problem?

First the crazy touch button. They if you had pressed. It appeared the menu, brightness settings, it was switched off (as if the button is pressed). Turned off, turned on and now this: it turns on, runs for a second or two, and then the screen turns off, although the lamp is lit in blue (as if it is running). Hyped. A coupl...
1
answer

How to replace battery on more volume on the Bluetooth receiver?

All the best!Brief background: bought Ali Express Bluetooth receiver in the car music from your phone to listen without a wired connection. A year later, the receiver came off the MicroUSB connector. Connector I fixed it, but in the process of renovating came up with the idea to replace the battery for a more voluminous tha...
Susan asked March 31st 20 at 15:04
4
answers

How to remove solder from flat dimes?

Hi all. Tell me how to unstick my feet? Brought in a flat of dimes. Solder is not strong. Tried braid and soldering iron to 230g+flux gel raxant for the bga and smd. Nothing relieves. Tip is thin enough(Lukey 852d)
jaunita_Moore asked March 29th 20 at 20:03
1
answer

How to solder the plug from the headset to the speakers?

Hello! Faced with the need to solder the new plug to the cable of my stereo speakers SVEN. The plug on the end which is connected to the speakers has a standard TRS connector. On the other hand have red and white cable, and next to them are 2 more cable without insulation, the earth, as I understand it. Also there is a scre...
annette43 asked March 29th 20 at 19:35
0
answer

Where to repair socket G34 in Moscow?

Welcome! I got a server for personal use, the previous owners which is very sloppy he was and broke down in two of the four socket pins, pieces 15-20 each, not counting the jammed. Overall piece of hardware working and all percent fairly consistently hold the load, but one socket does not see the memory in their slots, and ...
myron.Leffl asked March 24th 20 at 14:59
2
answers

Ambilight RGB tape 12V 4 pins — is this possible?

Good day ! Gave me this here B/U strip RGB, it as seen in the photo 12V. and 4 pins sootvetsvtenno. All projects which are seen on the Internet designed for 3-pin female ribbon ( 5v, DI, ground). The question is - can it work correctly Ambilight on arduino nano ( for example in ambibox) If Yes, then how to unsolder to A...
Kurt.Roberts11 asked March 19th 20 at 20:57
1
answer

How to power LED Room strobe 108 Strobe 12V from?

Zdravstvuite, there is a strobe LED Room Strobe 108 which operates from 220V, I want to be powered by a 12 volt, but can't find where to connect the 12 volts... can someone help?
estel95 asked March 19th 20 at 20:35