Questions tagged [Wake-on-LAN] (27)

0
answer

Where sets the SecureOn?

Good! Set up function Wake-on-LAN on your computer. WOL app on Android successfully wakes the computer. There is a possibility to set SecureOn Passowrd for the magic packet to pass through a forest of strangers. Tell me where you can set SecureOn? In the network adapter properties not found in the BIOS too. Win 10 pro x64....
Terrill.Carroll67 asked April 8th 20 at 17:30
0
answer

How to configure WoL Windows 10 LTSC?

Can't get to work correctly for Wake On Lan. Tune into the BIOS and turn off the computer before reaching the OS boot - WoL works. PC perfectly is activated after emergency shutdown. Also WoL works fine in sleep mode. But if it exits normally through start-up, the LEDs on the network faded out and of course WoL is not w...
amelia.Stark asked April 8th 20 at 09:50
2
answers

How to configure Wake On Lan?

Have a PC with UEFI BIOS and Windows 10 on Board. It must be turned on and off via the remote (the awakening from sleep - is also an option). You can use Wake on Wan on the basis of Wake on Lan. But how to configure Wake-on-Lan, so you can remotely (via the Internet) to enable this PC? There are straight-white-dynamic IPv4,...
Wilfred asked April 7th 20 at 16:45
1
answer

Why Wake On Lan does not work sometimes?

There is a conventional PC chipset Intel Z170 and have the router synology rt2600ac the router has the ability to do WOL from the web interface the router, in most cases everything works but sometimes, well, does the PC not waking up. What could be wrong?
angie_Weimann asked March 29th 20 at 23:34
1
answer

Wake-on-Lan outside of the router — possible?

The computer, which is needed to awaken, is not behind a router, and on the same network as the router. The computer from which slesa package is for the router (Wi-Fi). Possible? Have the network card has two settings - Magic Packet, Directed Packet and. If you have enabled Directed, it wakes up by itself, no time off. If d...
Raphael_Denesik19 asked March 27th 20 at 13:46
4
answers

Not getting the magic packet from the Internet?

WOL the computer is running, via the local network everything runs. But using the Internet WireShark says that the port is not available, although the router port forwarding on the PC and the firewall is disabled. I tried to forward the ports in 198.168.1.2(PC) and 198.168.1.255.Router
Esta asked March 24th 20 at 13:00
3
answers

Wake-on-LAN in the gray network? SSH?

Set out the essence. Going out of town. With a notebook. Home is PC and the Router. Must be able to access the PC at any time. The problems are two: to access the PC from the Internet for two NAT; start PC remotely via WOL. Individually the problems are solved just.The first purchase is VDS (for different purposes) + 2+1 ...
zella29 asked March 24th 20 at 11:58
1
answer

Configure Wake on Lan?

Good time, pleeease reply. I want to set up WoL on a laptop, but I don't know what card to customize out? screenshot attached, as I understand it if I turn these settings on Windows and in the uefi there is no point APM priori, then nothing will work or not?
devyn_Reichel asked March 20th 20 at 11:16
3
answers

Why doesn't WOL?

There was a need to turn on the laptop is deleted. My actions. 1. Take the external ip and the Mac and put it in the app on the iPhone (WakeOnLan). 2. Perform probasco ports 3. Check the checkbox quick start in the power supply 4. Check the box "allow this device to Wake...." 5. Configure the firewall for UDP 7 or 9 port. 6...
Elissa.Metz asked March 20th 20 at 10:29
2
answers

Why iMac is constantly out of sleep himself?

Why iMac is constantly out of sleep himself? Enable the option "Wake from sleep for network access". Mac comes out of sleep somewhere every minute. How to find out why? Disable the option not to offer, I need to remove access to Mac always. Maybe there are some logs that you can look and say, yeah that's this process show...
Alexa.Labadie6 asked March 17th 20 at 13:27